Intermec EasyCoder PF4ci Installation Instructions Manual page 12

Cutter kit

Hide thumbs Also See for EasyCoder PF4ci:

Table of Contents

Chapter 2 — Physical Installation

• Put back the front/left side cover. Route the console cable above the

ribbon motor (thermal transfer model only). Connect the cable to J50

at the top/front corner of the CPU board (marked "console").

• Connect the power cord and any communication cables. Check that

the cutter is closed and switch on the power.

Cutter Kit (EasyCoder PF4i-series) Installation Instructions

Table of Contents

Easycoder pf4i Easycoder pf4i compact industrial