Setup Description; Navigating The Setup Tree - Intermec EasyCoder PD42 User Manual

Appendix C — Setup Parameters (Fingerprint)

Setup Description

Navigating the Setup Tree

82
The printer's Setup parameters control the way the printer
operates. The setup parameters can be accessed and changed in a
variety of ways, see "Changing Configuration Settings" on
page 31 for more information.
Note: The recommended way to set your printer's configuration
parameters is to use the PrintSet 4 program, which is included on
the PrinterCompanion CD. PrintSet 4 can communicate with
your printer either via a serial cable or a network connection.
This section provides an overview of the branches and nodes in
the setup tree, as it is presented in the display window.
Note: The setup tree is shown as it exists in Fingerprint 10.2.0.
Dotted boxes indicate features that are only available on printers
equipped with optional equipment.
Boxes with thick frames indicate default settings.
Values inside brackets can be modified to any value specified by
the user.
EasyCoder PD42 Printer User's Guide