Intermec EasyCoder PD42 User Manual page 47

EasyCoder PD42 Printer User's Guide
SELECT MEDIA
Functions in Extended Testmode
Function
Select Media
Test Labels Setup Info
Dumpmode
Factory Default
Setup and Exit
Exit
Chapter 3 — Configuring the Printer
Description
This is the same media setup function as in
Test mode, with the important difference
that the printer performs a slow sensor
calibration (slow testfeed). Performing a
Slow testfeed can be a way to resolve gap/
mark detection problems.
Print configuration labels, one at a time.
Press Acknowledge (
label. The display indicates which test label
is next.
Enter Dumpmode. For more information
about running Dumpmode, see
"Troubleshooting Communication
Problems" on page 45.
Restore factory default settings. Select the
option, and follow instructions in the
display.
Exit Extended Testmode, enter Setup
mode.
Exit Extended Testmode.
) to print the next
37