Intermec EasyCoder PD42 User Manual page 51

EasyCoder PD42 Printer User's Guide
Chapter 4 — Troubleshooting and Maintaining the Printer
Display Error Messages (Blue Ready-to-Work LED Blinks)
Error Symbol Error Message
Label not taken.
LSS too high, LSS
too low.
IP Configuration
Error.
Display Error Messages (Error LED Blinks)
Error Symbol Error Message
Field out of label.
Out of media.
Solution
Printing has been halted because
a label is obstructing the LTS
sensor.Remove label to resume
printing.
These errors can occur when
you run a testfeed without any
media installed, or if you have
incorrect media settings.
Load the printer with media
(see "Loading Media" on
page 14). Restart the printer in
Test mode (see "Running
Testmode" on page 34) and
select the appropriate media
type.
The printer is trying to acquire
an IP address from the network.
Wait for it to complete the task.
Solution
You are attempting to print in
an area that extends beyond the
"print window." See appendices
C (Fingerprint) and D (IPL)
information on how to set the
media parameters.
Load media in printer. See
"Loading Media" on page 14.
41