Vapormed Volcano MEDIC 2 Instructions For Use Manual page 94

Hide thumbs Also See for Volcano MEDIC 2:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 70
Screw on Filling Chamber Cap
Dronabinol (THC) is available as an al-
coholic solution.
The advantage of this is that the liquid
is distributed more equally around the
stainless steel wire of the Drip Pad,
yielding a larger surface area that can
be vaporized.
However, the alcohol must first be sep-
arated from the dronabinol, as alcohol
should not be inhaled.
To do that, place the Filling Chamber
with cap on the Hot Air Generator and
screw it on clockwise as far as it will go.
Switch on the heater (HEAT), adjust
the set temperature to 100°C (212°F)
and let it heat up until the actual tem-
perature reaches 100°C (212°F).
Then press the touch button labeled
'AIR' to pump air through the Drip Pad.
The dronabinol does not vaporize
at this temperature, but the alcohol
evaporates quickly (within 30 sec.).
6 . T H E U S E O F D R O N A B I N O L
Since alcohol has a characteristic
odor, you can easily determine by
smelling whether the Filling Chamber
is alcohol free. Dronabinol has neither
odor nor taste.
Separate alcohol
When the Filling Chamber is free of al-
cohol, press the touch button labeled
'AIR' again to switch off the airflow.
The dronabinol, which evaporates only
at higher temperatures – over 157°C
(315°F), remains in the Drip Pad.
Then adjust the set temperature to
210°C (410°F) and continue heating.
94

Advertisement

Table of Contents
loading

Related Products for Vapormed Volcano MEDIC 2

This manual is also suitable for:

01 01 m

Table of Contents