Temperature Setting - Vapormed Volcano MEDIC 2 Instructions For Use Manual

5 . T H E VOLCA NO M E DIC 2 H O T A I R G E N E R AT O R

5.6. Temperature Setting

Actual Value Display
(orange)
Mains Operation
Display
Touch Button
Temperature Minus
Touch Button
Heater (HEAT)
When you briefly tap on the touch but-
ton Temperature Plus or Minus, the set
values are increased or decreased in
the respective direction in 1-degree
increments.
If you keep the touch button Tempera-
ture Plus or Minus pressed, the set val-
ues start running continuously in the
corresponding direction. If the touch
button Temperature Plus and Minus is
activated simultaneously, the display
changes from degree Celsius to de-
gree Fahrenheit and vice versa.
If the actual value is higher
than the set value, you can
speed up the cooling down
process by switching on the air pump.
30 minutes after the last time a
button is pressed, the devi-ce
automatically switches off.
Pump Display
Touch Button
Pump (AIR)
As long as the heater has a substan-
tial amount of residual warmth, the
temperature is displayed until it drops
below +40°C (+104°F).
Then the display turns off, and the on
the mains operation display indicates
that the Hot Air Generator is connect-
ed to the mains supply.
The device is safely discon-
nected from the mains only
when the plug is removed
from the socket.
91
Set Temperature Display
(white)
Touch Button
Temperature Plus