Page 1
How to change network mode of PA2S & PA3? Version: 1.0 Release Date: 15 ,Nov,2021...
Page 2
Catalog How to change network mode of PA2S & PA3? ................1 Introduction........................... 3 1.1. Overview ........................3 1.2. Applicable Model ......................3 1.3. Before You Start ......................3 1.4. Connection Diagram ..................... 3 How to change network mode for PA2S/PA3 ..............5 2.1.
Introduction Overview 1.1. Both PA2S and PA3 support static IP and DHCP on network mode. This document introduces how to change network mode between Static IP and DHCP for PA2S & PA3. Applicable Model 1.2. Fanvil PA2S and PA3 Before You Start 1.3.
Page 4
Fanvil Technology Co. Ltd Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China Tel: +86-755-2640-2199 Email: sales@fanvil.com support@fanvil.com Official Web:www.fanvil.com...
Page 5
Please check the following steps for detail. The default network mode for PA2S/PA3 is DHCP. If the network mode of PA2S/PA3 is Static IP, you can change it to DHCP. If the network mode of PA2S/PA3 is DHCP, the network mode won’t change, the device will just broadcast its IP address.
Page 6
Fanvil Technology Co. Ltd Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China Tel: +86-755-2640-2199 Email: sales@fanvil.com support@fanvil.com Official Web:www.fanvil.com...