Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for J-Tech Digital JTD-2865
Summary of Contents for J-Tech Digital JTD-2865
- Page 1 USB-C Wireless Extender JTD-2865 | JTECH-WDEX-10M Transmitter...
- Page 2 How to Mirror Install the Receiver Connect the JTECH-WDEX-10M receiver to the HDMI input port on the TV or Display and power on via USB 5V/1A adapter. Plug and Play Connect the JTECH-WDEX-10M transmitter to USB-C port of source computer or mobile device. The transmitter’s LED will blink while in pairing mode.
- Page 3 How to Pair Transmitter with Receiver Enable Pairing Mode for the Receiver (1) Power up the receiver via external USB power adapter (5V/1A). (2) Plug the receiver in to the HDMI port on the display (3) Using a pin, press the reset button in the reset hole on the receiver for 2 seconds.
Need help?
Do you have a question about the JTD-2865 and is the answer not in the manual?
Questions and answers