Summit FF1DSS24 User Manual page 15

will not close
• The gaskets are dirty.
properly.
• The racks or bins are out of position.
• "E0" indicates a communication error
for 3 zone models.
Display "E0", • "E1" or "E2" indicates that the air
"E1". "E2",
temperature sensor has failed.
"E3", "E4",
• "E3" or "E4"indicates that the defrost
"E5" or "E7".
sensor in the evaporator has failed.
• "E5" indicates defrost heater failure.
• "E7" indicates door switch failure.
Has a drawer been open for longer than
60 seconds? If not, then the
temperature has risen higher or fallen
lower than the temperature that has
The alarm
been set. This could be due to:
sounds and
• The appliance drawers being opened
the
too often.
temperature
• The ventilation opening being
display
covered or too dusty.
flashes.
• A lengthy interruption in the power
supply.
• A large amount of food has been
added to the unit.
• The display temperature is out of
The icon "--"
range.
is lit and
flashing in the
temperature
display.
If you've checked the table above and find that you still need help with your appliance, call our
Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to
answer your questions.
adjustable feet.
• Clean the drawer gaskets.
• Check the racks and bins and refit
correctly.
• Call for service.
If yes, close the drawer.
• Do not open drawers more often
than necessary.
• Clear the obstructions and clean off
the dust.
• Leave the appliance to work for a
while until the set temperature has
been reached.
• Only temperatures within the range
0~99°F/-9~37°C for SPR626OS2D
and the range -49~99°F/-45~37°C
for SCFF51OS2D can be
displayed. If the temperature is not
within this range, the icon "--" will be
displayed instead. This is normal.
15