Child Lock; Reset To Defaults; Connecting To Wifi; Downloading The App - Ecostrad iQ Plus Instruction Manual

• Press to confirm and move onto the next setting.
5-5-5 | Time synchronisation (F5)
This setting controls whether the time set on the heater automatically synchronises
with the time on the app when the unit is controlled via WiFi.
• Press to put the heater into standby mode and hold down
enter the settings menu.
• Press to skip through the settings until F5 appears on the screen, followed by
the current setting. Default is "oN" - enabled.
• Use the and
Press to confirm and move onto the next setting.

5-6 | Child lock

Press and hold the
appear and all keys will be locked, except for standby button. To unlock, repeat this
process, and the

5-7 | Reset to defaults

Press to put the heater in standby mode. Press and hold the
to restore the device to default settings: Comfort: 19 °C, Eco: 19 °C, Time: 00:00, Day:
1 (Monday), Program: 24/7 Eco Intervals, Temperature Compensation: 0 °C, Open
Window Detection: Disabled, LST Setting: Disabled, WiFi Function: Enabled, Time
Synchronisation: Enabled.

6 | Connecting to WiFi

6-1 | Downloading the app

The Ecostrad iQ Plus Panel Heater is designed to work with the Smart Life
app.
Scan the code below to go to the app. Press install and follow the app's
instructions to create an account.
NOTE — The Smart Life app is a constantly evolving third party system.
This guide was correct at time of printing but may differ slightly from
future versions. The app is designed to work on Android or iOS but older
software versions may affect app presentation and performance.
Ecostrad_iQ_Plus_V2.6_15022022
keys to adjust. Select "oN" to enable and "oF" to disable.
and keys for 5 seconds to lock the display. The
icon will disappear.
for 5 seconds to
icon will
key for 10 seconds
17