Child Lock - Ecostrad iQ WiFi Instruction Manual

customisable program. You can modify the program when you connect to the
element with the app. See section 6-3-2 for full instructions. It is not possible to set
the program via the control dial.
The program consists of 24 hourly slots for each day of the week which can be set
to either comfort or eco
program mode, the display will show
heat the room to the temperature set on the corresponding mode. If you put the
element in program mode when you have not yet connected to the app, the
element will follow the default program: eco mode for every interval.
4 – 3 – 4 | Radiator Mode
When the icon displays on the screen, you are in radiator
mode. In this mode, the element controls the radiator's internal
temperature and heats to a constant set temperature. The
internal thermostat measures the temperature of the heating fluid
and instructs the element to heat or stop heating according to the
temperature set. When heating, the
heating, the symbol is fixed.
The temperature displayed is the set temperature. Set temperature range is 30-70
°C and can be adjusted in steps of 5 °C using the
Timer Function
Radiator mode also incorporates a timer function. When the timer is set, the
element will heat to the set internal temperature for the time period selected. When
the period ends, the element will switch to standby mode and cease heating.
When the timer is running, the element displays the remaining time, rounded up to
the nearest hour, instead of the set temperature. Set timer range
is 0 – 8 hours, in steps of one hour, and can be adjusted as
below:
• Hold down the
• Use the
and
If you need to cancel the timer, you can either press
or use the button to cycle through the modes until the
The element will resume heating to a constant temperature indefinitely.
4 – 4 | Child Lock
Press and hold the
appear and all keys will be locked. To unlock, repeat this process, and the
will disappear.
Ecostrad_iQ_WiFi_Element_V1.2_19072021
mode. When a comfort or eco interval is running in
or
symbol flashes; when not
button until the display shows "2H".
buttons to set timer period.
and keys for 5 seconds to lock the display. The
accordingly, and the element will
and buttons.
until the display says "0H",
icon displays again.
icon will
icon
11