Related Manuals for Ecostrad Klasse iQ
Summary of Contents for Ecostrad Klasse iQ
- Page 1 Ecostrad Klasse iQ Electric German Radiator PLEASE READ AND SAVE THESE INSTRUCTIONS...
- Page 2 Symbols Warning This symbol indicates a hazard with an average risk level which, if not avoided, could result in serious injury or death. Warning of electrical voltage This symbol indicates danger to the life and health of persons due to electrical voltage.
-
Page 3: Table Of Contents
Contents About the Product - - - - - - - - - - - - - - - - - - - - 4 2 | Warnings & Precautions- - - - - - - - - - - - - - - - - 5 3 | Technical Information - - - - - - - - - - - - - - - - - - 8 4 | Installation - - - - - - - - - - - - - - - - - - - - - - - - - 9 Fixings - - - - - - - - - - - - - - - - - - - - - - - - 9... -
Page 4: About The Product
The deep fluted front and back panels of the Ecostrad Klasse iQ increase the surface area and funnel air past the hot ceramic core, ensuring maximum heat diffusion. -
Page 5: Warnings & Precautions
2 | Warnings & Precautions Read this manual carefully before using or installing the radiator. Always store the manual in the immediate vicinity of the radiator or its site of use. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, serious injury, or all of the above. - Page 6 Warning Do not use the device in enclosed spaces if persons are present who cannot leave the room independently and are not under constant supervision. • In the event of a fixed connection, an all-pole separator with a minimum 3mm contact opening width must be built in •...
- Page 7 • Do not use in rooms or environments that have a corrosive atmosphere. • Do not operate the device when wet. If the device gets wet during cleaning, allow it to dry out before using. • Do not expose the device to water jets. •...
-
Page 8: Technical Information
3 | Technical Information Table 1 | Specifications Heating Element Magmatic® Heat Retention Tablets. Voltage 230V 50 Hz Wattage Horizontal 500W, 1000W, 1500W, 1800W, 2000W Vertical 1200W, 1800W 800W, 1600W Set Temperature Range 7-30 °C Set Temperature Resolution 0.5 °C IP Rating IP20 Appliance Class... -
Page 9: Installation
4 | Installation 4-1 | Fixings Before beginning installation, check that all fixings in Table 3 are supplied. The radiator should only be wall mounted with the manufacturer’s fixings. Table 3 | Fixings supplied with radiator Bottom hooks x2 Top hooks x2 U-rails x2 Wall plugs x4 Wall mounting screws x4... - Page 10 1. Choose the mounting position, respecting the minimum distances from surrounding walls, ceilings or fixed objects as stated below: 5cm from the sides to masonry 10cm from the sides to flammable materials 8cm from the bottom to the floor ...
- Page 11 4. Hold the U-rails to the walls based on the positions established in step 3. Mark the drilling locations through the holes in the U-rails. Figure 2 | Finding and marking drill hole locations 5. Drill the four holes and fit the wall plugs into the holes. Figure 3 | Drilling the holes and inserting wall plugs 6.
- Page 12 7. Fit the two bottom hooks into the slots on the U-rails with the hook facing up, as shown in Figure 5 below. Figure 5 | Inserting bottom hooks 8. Insert the two top hooks into the U-rails with the hook facing down. Pull up as far as the slot will allow.
- Page 13 10. Pull up the top hooks as high as they will go in the slots. Slowly push the heater up to vertical. The top hooks should fit over the top of the heater (see Figure 8). Warning – due to the weight of the heater, it is recommended that this step is not attempted alone.
-
Page 14: Free Standing Instructions
4-3 | Free standing instructions The Ecostrad Klasse iQ is available with optional feet or castors (sold separately). These are only compatible with the horizontal or low Ecostrad Klasse iQ models. Never attempt to fit castors or feet on a vertical Ecostrad Klasse iQ. -
Page 15: Connecting To Power
4-4 | Connecting to power The Ecostrad Klasse iQ arrives with a separate power cable. To connect to power: 1. Remove the power cable from the packaging. 2. Connect the kettle lead socket to the radiator. The connection point is on the bottom of the end panel. -
Page 16: Controlling The Radiator
Figure 13 | Control dial display 5-2 | First power on When you first power on the Ecostrad Klasse iQ, the screen will stay blank for approximately 5 seconds. Then, the Ecostrad loading screen will appear and the radiator will turn on in manual mode. -
Page 17: Heating Modes
5-4 | Heating modes The Ecostrad Klasse iQ has 2 main heating modes: manual mode and program mode. There is also a boost mode which can be activated in both manual and program mode. In all heating modes, if the set temperature is above the room temperature, the radiator will begin to heat (unless heating has ceased due to open window detection or overheat protection). -
Page 18: Settings
5-4-4 | Boost The Ecostrad Klasse iQ is equipped with an easy boost feature which allows you to temporarily change the set temperature without altering your current settings. This boost is more flexible than temporary override as it can be used in either manual or program mode and can be set for a much longer period of time. - Page 19 Within the program setting menu, you can set the program (schedule), adjust the program pre-set temperatures, and turn on or off adaptive start. Setting the program The program of the Ecostrad Klasse iQ consists of 24 hour-long slots which can each be set to a pre-set temperature: comfort , eco or anti-frost .
- Page 20 Adaptive start Adaptive start is part of program mode and is an energy saving feature designed to adapt your program start times based on the room temperature. For instance, if the room is particularly cold, adaptive start will make sure your radiator starts heating earlier to ensure your room is warm when you want it to be.
- Page 21 Calibration Temperature calibration allows users to adjust for any discrepancy between the average room temperature and the temperature sensed by the thermostat. For instance, if the temperature in the room is 18 °C, but the radiator is sensing 16 °C, a compensation factor of +2 °C will offset the difference.
- Page 22 This is represented by icons. Press to confirm. Language The Ecostrad Klasse iQ is set up for English and German. To change the language: 1. Use to enter the menu 2. Use to choose between English and German.
-
Page 23: Keypad Lock
Table 5 | Factory default settings Parameter Default Brightness ON Brightness OFF Sound Language English WiFi connect Time 00:00 Program All frost 5-6 | Keypad lock The keypad lock allows you to lock the keypad to prevent accidental adjustments of the heating parameters. The keypad lock can be activated in any mode, including standby. -
Page 24: Connecting To Wifi
6 | Connecting to WiFi 6-1 | Downloading the app The Ecostrad Klasse iQ Electric German Radiator is designed to work with the Smart Life app. Scan the code below to go to the app. Press install and follow the app's instructions to create an account. - Page 25 4. The app will demonstrate that it has found the radiator (see Figure 15). Press “Add”, then tap the icon. Figure 15 | Finding device on Smart Life app 5. The app may ask you to choose your WiFi network and enter the password. Press "Next".
- Page 26 WiFi Connection — Troubleshooting If the radiator does not connect on the first attempt: • Make sure both the radiator and your smart device are in range of your router. • Make sure you complete the connection process in 2 minutes. If the pairing screen has timed out, begin the process again.
-
Page 27: Using The App
7 | Using the App NOTE – The Smart Life app is a constantly evolving third party system. The guide below was correct at time of printing but may differ slightly from future versions. 7-1 | Home overview You can use the Smart Life app to control multiple devices. -
Page 28: Choose Mode
7-3 | Choose mode Tap the mode icon on the control interface to choose mode. The options correspond to the modes on the control panel: manual and program mode, as well as boost mode. 7-3-1 | Manual mode In manual mode, simply use the sliding dial or the –... -
Page 29: Device Settings
Make sure you give the heater a name that’s easy for you to say and for your voice interface to understand. You can change the radiator’s name in the Smart Life app. Table 6 | Voice commands for the Klasse iQ Command Action •... - Page 30 Table 6 | Voice commands for the Klasse iQ (Continued) Command Action • Set <device name> to In manual mode, this <temperature> degrees changes the manual set temperature. In program mode, this °C changes the temporary override temperature. Choose value from 7 to •...
-
Page 31: Warranty
What does the warranty cover? Within the stated period, starting from the date the customer receives their unit, Ecostrad guarantee to repair or replace the unit where a fault is due to defects in materials or manufacturing. What does the warranty NOT cover? The warranty does not cover any defect arising from damage, negligence, usage outside the product’s intended purpose or fair wear and tear. -
Page 32: Disposal
For queries, contact: The UK manufacturer The ROI Importer Ecostrad Ltd. Ignition Heatco Ireland Limited Firecrest House Unit 282 Lingerfield Business Park...