5 | Control Panel
5-1 | Power switch
Before use the heater must be switched on at the
mechanical switch at the base of the unit shown in
Figure 6.
5-1-1 | Memory function
In the event of power failure or disconnection,
program and temperature settings will be
remembered and the heater will restart on the
mode it was previously running. If the heater is
connected to the WiFi, the time setting will
synchronise with the app. If the heater is not
Figure 6 | Power rocker switch
connected to WiFi, the time will need to be re-set.
5-2 | Display
The control panel, shown in Figure 7, includes a backlit LCD display. The backlight
switches on when the panel is in use and times out after thirty seconds not in use.
Set
Time
Temperature
Standby/On
Mode switch
Timer
program
Day of the
week
Increase
Decrease
time/temperature
time/temperature
Figure 7 | Control screen
Ecostrad_iQ_Plus_V2.6_15022022
11