Table of Contents
Advertisement
Icons used on the control panel can be found in Table 5.
Symbol
Meaning
Comfort
Eco
Anti-freeze
Timer
Boost mode
5-3 | Standby mode
When the heater first switches on it appears in standby mode, where the time is
displayed and the heater will not heat. You can use the
standby and heating modes. When the heater first turns on, the time will appear as
00:00. You can set the correct time in timer mode, see section 5-4-4.
5-4 | Heating modes
Tap the
button to switch the heater on. Tap
on the display will change accordingly, browsing through: Comfort
Anti-Freeze
, Timer
You can also scan this QR code to watch a instructional video on using the
following heating modes.
5-4-1 | Comfort mode
When the
icon (and only the
are in comfort mode. In this mode, the heater heats to a constant set
temperature. The thermostat measures the room temperature and
switches the heating on and off accordingly. The
when the heater is heating.
The default set temperature is 19 °C. Set temperature can be adjusted using the
and
buttons. Set temperature range is 7-30 °C.
The temperature set in comfort mode also applies to comfort intervals when they
occur in timer mode.
Ecostrad_iQ_Plus_V2.6_15022022
Table 5 | Icons and their meanings
Symbol
and Boost mode
icon) displays on the screen, you
Meaning
Keypad locked
Connected to WiFi
Device is heating
Open window detected
LST mode
button to switch between
to switch between modes. The icon
.
icon displays
, Eco
,
12
Advertisement
Table of Contents
