Standby Mode; Heating Modes - Ecostrad iQ WiFi Instruction Manual

4 – 2 | Standby Mode
In standby mode the time is displayed and the element does not heat. You can use
the button to switch between standby and the heating modes. When the
element is first switched on, the time will appear as 00:00. The display will update
to the correct time when the element is connected to the app.
4 – 3 | Heating Modes
Tap the button to switch the element on. Tap to switch between modes. The
icon on the display will change accordingly, browsing through: Comfort , Eco ,
Program , and Radiator mode.
4 – 3 – 1 | Comfort Mode
When the and icon display on the screen, you are in
comfort mode. In this mode, the element controls the room
temperature and heats to a constant set temperature. The
external thermostat measures the ambient temperature and
instructs the element to heat or stop heating according to the
temperature set. When heating, the symbol flashes; when not
heating, the symbol is fixed.
The temperature displayed is the set temperature. Set temperature range is 7-30
°C and can be adjusted using the and buttons. You can check the current
room temperature when you are connected to the app.
The temperature set in comfort mode also applies to comfort intervals when they
occur in program mode.
4 – 3 – 2 | Eco Mode
When the and icon display on the screen, you are in eco
mode. Just like comfort, in this mode the element heats to a
constant set room temperature. However, eco mode is designed
to be set to a lower temperature, providing a low-heat, energy-
saving alternative for when you are sleeping or out.
Set temperature range is 7-30 °C and can be adjusted using the and
buttons.
The temperature set in eco mode also applies to eco intervals
when they occur in program mode.
4 – 3 – 3 | Program Mode
When the icon and current time display on the screen, you are
in program mode. In this mode, the element follows a user-
Ecostrad_iQ_WiFi_Element_V1.2_19072021 10