THORLABS MPH16-UC User Manual page 11

Motorized Pinhole Wheel, Uncoated
5.
Connect one end of the power supply to the MPH16-UC and the other
end to a standard power outlet.
6.
Double click the
saved on your local drive.
The MPH16 Com Port Selection window appears.
7.
Select COM7 from the drop down menu and click OK.
Check Device Manager >Port (COM & LPT) on your computer to verify
the that the COM Port of Silicon Laboratories CP210x USB to UART
Bridgeis set to COM7.
Note: If COM7 is in use by another device, a different COM Port can
be used as long as it matches the COM Port Selection made within
the MPH16 software.
8.
The MPH16 Pinhole Control window appears.
Rev B, February 21, 2021
MPH16_Control.exe
Chapter 4: Getting Started
file from the Application folder
Page 7