Qsfp28 Port Led - H3C S6520X-EI Series Manual

QSFP28 port LED

The S6520X-30HC-EI, S6520X-54HC-EI, S6520X-30HC-HI, S6520X-54HC-HI, S6520X-30HF-EI,
S6520X-54HF-EI, S6520X-30HF-HI, and S6520X-54HF-HI switches each provide QSFP28 ports. A
LED is provided for each QSFP28 port to indicate its operating status.
Table4-25 QSFP28 port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Expansion card status LED
The expansion card status LEDs SLOT1 and SLOT2 on the front panel indicate the operating state
of the expansion cards in slot 1 and slot 2, respectively.
Table4-26 Expansion card status LED description
LED mark
SLOT1/SLOT2
Port status LED on an expansion card
An expansion card provides a port status LED for each port. For more information about the LEDs,
see the manual for the expansion card.
Input/output status LED on a power supply
The PSR250-12A and PSR250-12A1 power supplies each have a LED on the front panel to indicate
the power input and output status. For more information about the LED, see the manual for the
power supply.
Fan tray status LED on a fan tray
The LSWM1FANSCE, LSWM1FANSCBE, LSPM1FANSA-SN, and LSPM1FANSB-SN fan trays
each have a LED to indicate the fan tray operating status.
Description
A link is present on the port and the port is operating at 100 Gbps.
The port is sending or receiving data at 100 Gbps.
A link is present on the port and the port is operating at 40 Gbps.
The port is sending or receiving data at 40 Gbps.
•
No transceiver module or cable has been installed in the port or no link is present
on the port.
•
The mode LED is in IRF mode. (Only supported on the S6520X-30QC-EI,
S6520X-54QC-EI, S6520X-30HC-EI, S6520X-54HC-EI, S6520X-30QC-HI,
S6520X-54QC-HI, S6520X-30HC-HI, and S6520X-54HC-HI switches.)
Status Description
Steady green The expansion card is present and is operating correctly.
Flashing yellow The switch does not support the card, or the card has failed.
Off The expansion slot is empty.