H3C S6520X-EI Series Manual page 6

S6520X-30HC-EI & S6520X-30HC-HI
Figure2-5 Front panel
(1) SFP+ port
(3) Management Ethernet port
(5) Micro USB console port
(7) USB port
(9) System status LED (SYS)
(11) Expansion card 1 status LED (SLOT1)
(13) Power supply 1 status LED (PWR1)
(15) QSFP28 port
Figure2-6 Rear panel
1 2
(1) Grounding screw
(3) Expansion card 1 (SLOT1)
(5) Fan tray 2 (FAN2)
(7) Power supply 2 (PWR2)
The S6520X-30HC-EI and S6520X-30HC-HI switches come with power supply slot PWR1 empty
and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for
the switch as required. In Figure2-6, two PSR250-12A1 power supplies are installed in the power
supply slots.
The S6520X-30HC-EI & S6520X-30HC-HI switches come with the two fan tray slots empty. You
must install two fan trays of the same model for the switch. In Figure2-6, two LSWM1FANSCBE fan
trays are installed in the fan tray slots.
The S6520X-30HC-EI & S6520X-30HC-HI switches come with a filler panel in each expansion slot.
You can select expansion cards for the switch as required. In Figure2-6, two LSWM4SP8PM
interface modules are installed in the expansion slots.
1
3 4
2
(2) SFP+ port LED
(4) Console port (CONSOLE)
(6) Mode LED (MODE)
(8) Mode button
(10) Expansion card 2 status LED (SLOT2)
(12) Power supply 2 status LED (PWR2)
(14) QSFP28 port LED
(16) Management Ethernet port LED (ACT/LINK)
5 6
(2) Fan tray 1 (FAN1)
(4) Expansion card 2 (SLOT2)
(6) Power supply 1 (PWR1)
3 4 5 6
7
8
9
12
16 14 10
13 11
15
7