H3C S6520X-EI Series Manual page 15

Item
Reference
Connecting cables to the ports on interface modules
To connect cables to the ports on interface modules, follow these guidelines:
•
Do not bundle cables in their first 20 m (65.62 ft).
•
Separate power cords and twisted pair cables at and around the distribution frame.
•
For ports adjacent to one another on the device, the peer ports on the distribution frame is
preferably not adjacent, for example:
•
If the device connects to one distribution frame, connect port 1 on the device to port 1 on the
distribution frame and port 2 on the device to port 3 on the distribution frame.
•
If the device connects to two distribution frames, connect port 1 on the device to port 1 on
distribution frame 1 and port 2 on the device to port 1 on distribution frame 2.
•
Keep the device and cables away from the interference source, such as a two-way radio and a
high-power variable-frequency drive.
Specifications
described in Table4-4, Table4-5, and Table4-6.
H3C LSWM2SP2PB & LSWM2SP4PB Interface Cards User Manual