OHM ELECTRIC COOL CABI OCA-H300BC-AW2 Instruction Manual page 49

7- Replacement of External fan
Replacement procedures for external fan is as follows.
Turn off the COOLCABI.
1）
or Standard type, detach the front panel.
2）
or Condensate-free type, detach the filter first and then detach the fan mounting plate.
Unscrew the fan fixing screws.
3）
Remove the fan cord, ground wire and insulation rubber to detach the fan.
4）
Attach a new fan to the COOLCABI in reverse order. Be careful not to pinch the fan cord.
5）
Do not forget to attach the insulation rubber to the fan terminals.
External fan
7-3 Replacement of Internal fan
Replacement procedures for internal fan is as follows.
Turn off the COOLCABI.
1）
Loosen the screws to detach the fan mounting plate. Position of fan mounting plate is different by model
2）
all-prevention screws are used for Roof mounting type.
Remove the fixing screws from the fan.
3）
Pull out the fan cord to replace the fan.
4）
Connect the fan cord and attach the fan mounting plate to the COOLCABI in reverse order.
5）
Be careful not to pinch the fan cord.
Int. fan mounting
plate
◎Replacement fan
Applicable COOLCABI models
OCA-H3 BC-AW
OCA-H6 BC-AW
OCA-H BC-AW
OCA-H 6 BC-AW
OCA-H BC-AW
OCA-H 9 BC-AW
OCA-H3 AC-AW
OCA-H7 AC-AW
OCA-H AC-AW
OCA-H 7 AC-AW
OCA-H 3 AC-AW
OCA-H3 AC-AW
OCA-H35 BCD-AW
OCA-H7 BCD-AW
OCA-H 3 BCD-AW
OCA-H 3 BCD-AW
External fan
Int. fan mounting plate
Internal fan
M- 5 38P-AW 3 -
M- 938P-AW-
M- 5 38P-AW 3 -
M- 938P-AW-
M- 5 38P-AW 3 -
49
Ext. fan mounting plate
Int. fan mounting
plate
External fan
M- 5 38M-AW 3 -
Insulation rubber