Service Function (Dialog); System > Setup > Freq. Ref - R&S ZNC 3 User Manual

Hide thumbs Also See for ZNC 3:

Table of Contents

Contains a chronological record of errors that occurred in the current and in previous

sessions. While the error log is open, additional buttons for printing, closing or clearing

(delete) the log are provided. The deleted error log shows the message "No errors

4.6.4 Service Function (Dialog)

The "Service Function" dialog gives access to the service functions of the instrument.

Service functions are password-protected and should be used by a Rohde & Schwarz

service representative only. Refer to the service manual for more information.

Access: SYSTEM > SETUP > Setup > Service Function...

Entry of a password to enable the selected service function.

Remote command:

S YSTem: P ASSword[: C ENable]

D IAGnostic: S ERVice: F UNCtion

D IAGnostic: S ERVice: S FUNction

4.6.5 System > Setup > Freq. Ref.

Selects a reference signal for synchronization between the R&S ZNC and external devi-

ces. A common reference frequency is generally advisable to ensure frequency accuracy

and frequency stability in the test setup.

Access: SYSTEM > SETUP key or Alt + Shift + T

User Manual 1173.9557.02 ─ 13

GUI Reference

System Settings

Table of Contents