Layer Adjustment
there are two ways to adjust layer.
1. Use the bar under the interface
Choose one layer and the bar shows its signal source, type in position and size.
2. Layer Scale and Crop
Alpha:0~128
Brightness/Contrast/Saturation:0~100
Freeze:Turn ON freeze to prevent misoperation
Layer Movement
Move the mouse to drag the layer.
Layer Remove
Click the cross
on the top right of the layer to remove the layer if needed.
Layer Max
Click this icon
to cover up all monitors in the same Display Area with the one signal, as the following:
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
29