Table of Contents
Advertisement
Click the icon
and click refresh
to check all available devices in the network.Click
to choose
D8 and click
to obtain the control of this device in【Chosen Devices】,as shown in the picture below.
purple
tip indicates input modules, blue
output modules,yellow
communication port.
Input Setting
Click any input port in purple area, the board where the port locates is selected. Users can do settings to the board
now. A red rectangle
flashes around the chosen port when it is clicked.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
18
Advertisement
Table of Contents
