Chapter 3 Use Your Product; Manu; Device Status; Standard - RGBlink D8 User Manual

Chapter 3 Use Your Product

3.1 Manu

Turn on the power switch on the rear panel and the touch screen will display Menu, SN , IP ,Fan Speed and
Temperature.

3.1.1 Device Status

Click [Device Status] to enter the interface.
The interface displays rear panel of D8. The interface icon will turn into green if there is a signal source.

3.1.2 Standard

Click [Standard] to enter the interface.
In this interface, users can view quad output resolution.

3.1.3 Splice

Click [Splice] to enter the interface.
In this interface, users can set Output Resolution, Splice Mode and Multi-device Cascade.
Output Resolution: custom and standard optional
Splice Mode:6 layouts available. Users can also set the screen height, screen width, horizontal position and vertical
position. Click [OK]/[Reset] to save/cancel the relevant settings.
Multi-device Cascade:
External Input Genlock Format: Show resolution
Genlock Output Format: Show resolution
Synchronization: Click [Synchronization] to start synchronization mode of
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
multi-device cascade
.
10