Before Your First Wash - Fisher & Paykel WH9060P4 User Manual

Check you have done everything you need to before you start your first wash:
…
Have the packaging and transit bolts been removed?
…
Is the washer correctly levelled, feet are extended and cabinet corners are clear of
the floor?
…
Is the drain hose threaded through the hose guide 'U bend' (with no more than
20mm extended) and hooked into your standpipe or tub, or attached to a spigot?
…
Have the taps been turned on?
…
Is the hot hose connected to the hot valve marked 'H'?
…
Is the cold hose connected to the cold valve marked 'C'?
…
Have you performed the test cycle? Refer to your installation guide.
…
Has the power cord been connected to an appropriate power supply and the power
turned on?
…
Complete a Drum Clean cycle with half-load amount of detergent and without a load
in order to remove any residues remaining in the machine from the manufacturing
process.

BEFORE YOUR FIRST WASH

7