Crown CT21092H Original Instructions Manual page 33

Symbol
Power tool designation
The power tool has been designed for hole drilling in
wood, plastic and metal, as well as for screwing in and
loosening of threaded fastening elements (screws,
bolts, etc�)�
Meaning
Rotation direction�
Locked�
Unlocked�
Prohibited�
"Screwing" mode�
"Drilling" mode�
"Impact drilling" mode�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Attention� Important�
Useful information�
Wear protective gloves�
Stepless speed control�
Do not dispose of the power
tool in a domestic waste
container�
[CT21093HMX-2, CT21093HMX-4]
These models allow the impact drilling in brick, cement
and similar materials�
Power tool components
1 Additional handle *
2 Depth stop *
3 Keyless chuck
4 LED lamp
5 Battery lock *
6 Control button of the state of battery charge *
7 Indicators of the state of battery charge *
8 Clamping screw *
9 Step speed selector switch
10 Ventilation slots
11 Function switch
12 Torque regulator
13 Strap *
14 Reverse switch
15 On / off switch
16 Battery *
17 Belt clip *
18 Charger *
19 Screwdriver bit *
20 Screw
21 Magnetic holder *
22 Label *
23 Indicator (red) *
24 Indicator (green) *
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before execution of any procedures, centre the
reverse switch 14.
Do not draw up the fastening ele-
ments too tight to avoid damaging the
thread.
Mounting / dismounting / setting-up of
some elements is the same for all power
tool models, in this case specific models
are not indicated in the illustration.
Additional handle (see fig. 1)
[CT21090HMX-2, CT21090HMX-4, CT21093HMX-2,
CT21093HMX-4]
It's recommended use the additional handle 1 when
operating� Additional handle 1 may be positioned as
deemed comfortable by the user�
• Loose additional handle 1 as shown in fig. 1.1.
• Place additional handle 1 in desired position (see
fig. 1.2).
• Tighten additional handle 1 as shown in fig. 1.3.
English
33