Model Removal - IEMAI MAGIC-HT-M Operating Instructions Manual

4.4 Model Removal

Step 1
1.
Printed model on the build
platform
Step 4
1.
For the completed model the
base raft needs to be removed,
using the correct slicing
parameters the model and raft
body can be easily separated as a
whole by hand
Attention：For large models that are not suitable for dismantling inside the machine, the building platform can
Step 2
1.
Use a scraper from the lower left
corner of the model to insert
between the model and the
build platform to separate the
model from the build platform
Step 5
1.
The finished model and the
separated raft are finally
obtained
be taken out and dismantled outside.
19
Print More Materials, All For Application
Step 3
1.
Use a scraper from the lower
right corner of the model to
insert between the model and
the build platform to separate
the model from the build
platform