Table of Contents
Advertisement
Print More Materials, All For Application
2. Click the leveling button to use automatic leveling to
get the platform data. Wait for the printer to
automatically measure the platform 49 each test point.
3. Start printing and Z-axis compensation
After testing the printing platform, you can start printing.
If you find that the nozzle and platform spacing is not
ideal during the printing process, you can open and
change the data in the file of "Automatic leveling
compensation parameters" through Notepad, put the
changed file into the SD card, and use the 3D printer to
print this TXT file once, the compensation parameters are
changed.
15
Advertisement
Table of Contents
