Table of Contents
Advertisement
11
Maintenance
To help ensure long, trouble-free operation:
•
Always inspect fiber-optic connectors before using them and clean them if necessary.
•
Keep the product free of dust.
•
Store product at room temperature in a clean and dry area. Keep the unit out of direct sunlight.
•
Avoid high humidity or significant temperature fluctuations.
•
Avoid unnecessary shocks and vibrations.
•
If any liquids are spilled on or into the product, power off the chassis or the MATRIQ instrument
immediately. Remove the product and allow to dry completely.
The use of controls, adjustments, and procedures other than those specified herein may result
in exposure to hazardous situations or impair the protection provided by this unit.
Annual calibration schedule
To ensure that the Switch product is performing as expected, it is recommended that the product be
sent in for annual re-calibration. As an optical product will naturally degrade over time, it is important to
periodically re-test the product, to confirm that it is working as expected.
All Quantifi Photonics products are calibrated during manufacture, and each product is shipped to the
customer with a Calibration Certificate. On this certificate, the calibration date, as well as the next
calibration due date are mentioned.
We recommend your product is returned for re-calibration before the listed due date, to ensure
continued performance of the product. For re-calibration service information, or to send in a product for
re-calibration service, email service@quantifiphotonics.com.
If the Calibration Certificate has been misplaced, or the calibration due date is not known,
email service@quantifiphotonics.com.
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
Version
3.04
55
Advertisement
Table of Contents
