Settings Page - Quantifi Photonics 1000 Series User Manual

Settings page

The SETTINGS page is used to configure the CohesionUI settings and unit preferences or to synchronize
/ reinitialize the system. These controls can be accessed by clicking the SETTINGS button.
Step size refers to the amount by which the attenuation, frequency, or power increments / decrements
when the + or - button is clicked.
• The unit preferences and settings can be set by hovering over the SETTINGS button in the left
side menu. This will bring up a dropdown menu that lists all settings for a quick access.
• Whenever the chassis is power cycled, CohesionUI reverts to default settings.
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
Version 3.04 30