Switch 1000/1100/1400 MATRIQ instrument installation
STEP 1:
Insert power cord
STEP 3:
via Ethernet –
Connect Ethernet cable
•
You must use the external power supply that has been supplied by Quantifi Photonics
with the unit. Any attempt to use a different external power supply may cause product
damage and will void your warranty.
•
The external power supply that has been used with the unit can only be used with that
unit. Do not use it with any other product.
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
STEP 2:
Power ON the instrument
STEP 4:
IP address will appear on the LCD screen
via USB
Version
3.04
STEP 3:
via USB –
Connect USB cable
via Ethernet
15