Specific Command Summary; Specific Command Descriptions; Slot Commands - Quantifi Photonics 1000 Series User Manual

is returned if any module installed in the chassis still has a command to execute in the
0
input queue
Example *OPC? -> 1
Command *OPT?
Syntax *OPT?
Description Query the modules managed by the CohesionSCPI service
Parameters No parameters
Response Response will be a comma separated string of the installed modules in the chassis
*OPT? -> ,SwitchPXIe-1002-2-FA,SwitchPXIe-1003-1-FC,,VOAPXIe-1001-2-
Example
FA,,,,O2EPXIe-1001-1-FC,,,,,,,,,

Specific command summary

Slot commands

:SLOT<n>
:OPC?
:OPTions?
:IDN?
Configuration commands
:ROUTe<n>
:ERROR?
:CHANnel<m>
:ERROR?
:STATE/?

Specific command descriptions

9.5.1 Slot commands
Command :SLOT<n>:OPC?
Syntax
:SLOT<n>:OPC?
Description Query the status of the Operation Complete bit
Parameters No parameters
is returned if the module is ready to execute a new operation
1
Response
is returned if the module is busy
0
Example :SLOT1:OPC? -> 1
Command :SLOT<n>:OPTions?
Syntax
:SLOT<n>:OPTions?
Description Query the modules installed on the slot
Parameters No parameters
The response will be a comma separated string of detectors installed in the Switch. If a
Response
module is not installed in a channel, it will not return any identification string
Example :SLOT3:OPT? -> 1,,
Command :SLOT<n>:IDN?
Syntax
:SLOT<n>:IDN?
Query the Identifier for the slot; returns the manufacturer, part number, serial number,
Description
hardware and firmware versions
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
Description
- Query the status of the Operation Complete bit
- Query the modules installed on the slot
- Query the Identifier for the slot; returns the manufacturer, part number,
serial number, hardware and firmware versions
Description
- Query the error status of the Switch
- Query the error status of the specified channel of the Switch
- Set or query the routing state of the Switch
Version 3.04 43