Table of Contents
Advertisement
Modules list
All the installed modules are displayed on the HOME page. To access the controls for a module, click the
corresponding module name, or hover over the MODULES button and select a module from the
displayed list. Controls for a specific module, or a channel in a module are then displayed.
7.4.1
Set and Actual values
Some Quantifi Photonics products will allow the user to set a given parameter's value and then read
that parameter (eg. Laser, VOA, O2E, etc). In order to help the user to distinguish between a set value
and an actual read value, CohesionUI will format these values differently according to the legend in the
top right corner of the window.
•
ACTUAL
: the actual value of the parameter, defined by querying the module
•
SET: the intended value of a given parameter, defined by user input
In the following example, the POWER is
user can see both the current and user defined value of a given parameter.
ACTUAL
The
SET
and
values are only displayed for appropriate parameters which require user input.
For parameters that report a value and do not depend on user input, only an
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
SET
to
10.00
dBm, but the
Version
3.04
ACTUAL
-16.02 dBm
value is
ACTUAL
value is displayed.
. Thus, the
29
Advertisement
Table of Contents
