Network And Update Settings Controls For Matriq Instruments; Configuring The Network Interface Settings For Matriq Instruments - Quantifi Photonics 1000 Series User Manual

7.5.2

Network and Update settings controls for MATRIQ instruments

The network configuration control panel enables the user to set the preferred communication interface
(Ethernet or USB).
The Network interface controls are only available when connected over USB.
7.5.3

Configuring the Network Interface settings for MATRIQ instruments

The MATRIQ instruments can operate over either an Ethernet or USB connection. To communicate with
the instrument, the IP address is required.
The Network interface controls are only available when connected over USB. When connected
over Ethernet the settings will be locked, as highlighted as follows.
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
Version 3.04 32