Table of Contents
Advertisement
3. Select Manual Entry of LAN Instrument. Enter in the Hostname or IP Address. The top image is an
example of operating remotely, the bottom image is an example of operating locally. Note when
operating locally, enter in the localhost IP address of 127.0.0.1. Click Finish to end the setup process.
NI-VISA application
NI-VISA is used to communicate with the PXIe chassis or installed modules / instruments. The above
steps must be completed before attempting to communicate using NI-VISA.
1. Launch NI-MAX. In the left-hand side menu, select an Instrument from the Network Devices list.
2. On the righthand side panel, select Open VISA Test Panel. A new window will popup. Click the Input /
Output button from the window menu.
Valid chassis and module commands can be entered in, and their returns queried.
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
Version
3.04
50
Advertisement
Table of Contents
