Table of Contents
Advertisement
The addressing method can be changed to a static method, where the MATRIQ instrument will always
have the same IP address over Ethernet. Typing in a valid IP address and Subnet mask, and then
clicking APPLY will save the IP address into the settings of the instrument.
To test if the IP addressing has worked, power OFF the instrument, and disconnect the USB cable. Turn
the unit back ON, and once it has finished booting, check the IP address shown on the LCD screen.
SCPI Command Console (available on PXIe modules)
The CohesionUI SCPI Command Console enables you to communicate with Quantifi Photonics PXI
modules via SCPI commands. It enables you to test commands and verify their syntax.
For details on available SCPI commands, refer 9.
To open the SCPI Command Console:
•
On the CohesionUI menu, click CONSOLE.
The console will appear in the bottom right corner.
You can move the console by clicking on the title bar and dragging it to any position on the screen. On
closing and re-opening, the console will re-appear at its last position.
Quantifi Photonics Ltd.
Automated Optical Switch | Switch 1000/1100/1400 Series
Version
3.04
34
Advertisement
Table of Contents
