Table of Contents
Advertisement
This rangehood should be cleaned regularly using a mild, liquid detergent and a clean soft
cloth to avoid a build-up of grease occurring. Avoid the use of corrosive chemicals, abrasive
cleaning products, hard brushes and steel wool pads. Grease deposits are corrosive which
can cause damage.
In areas of high humidity or coastal environments, cleaning should be carried out more
frequently. Disconnect the product from the power source before undertaking any cleaning.
Do not operate the hood without filters in place.
Aluminum filters
Clean the filters at least once a month. Filters may need to be cleaned more frequently
z
depending on the cooking methods used and frequency of use.
Aluminum filters should be removed and cleaned with hot soapy water or in
z
a dishwasher.
If washed in a dishwasher, the filter should be placed in an upright position to prevent
z
food from falling on them.
After rinsing and drying, refit the filters.
z
Removing the aluminium filters
1
Replacing the aluminium filters
2
8
CARE AND CLEANING
Pull the catch and tilt the filter downwards
until it disengages from the supports.
Place the filter into the support at the rear
of the rangehood. Push the filter back
into place.
Advertisement
Table of Contents
