Table of Contents
Advertisement
Disconnect the product from the power source before undertaking any cleaning. Clean
your range hood regularly using a mild, liquid detergent and a clean soft cloth to avoid a
build-up of grease. Avoid the use of corrosive chemicals, abrasive cleaning products, hard
brushes and steel wool pads. In areas of high humidity or coastal environments, cleaning
should be carried out more frequently.
Do not operate the hood without filters in place.
Aluminum filters
Clean the filters at least once a month. Filters may need to be cleaned more frequently
z
depending on the cooking methods used and frequency of use.
Aluminum filters should be removed and cleaned with hot soapy water or in
z
a dishwasher.
If washed in a dishwasher, the filter should be placed in an upright position to prevent
z
food from falling on them.
After rinsing and drying, refit the filters.
z
Removing the aluminum filters
1
Replacing the aluminum filters
2
CARE AND CLEANING
Open the perimeter plate.
Pull the catch and tilt the filter downwards
until it disengages from the supports.
Place the filter into the support at the rear
of the range hood. Push the filter back
into place.
Close the perimeter plate.
11
Advertisement
Table of Contents
