Cleaning And Maintenance - Fisher & Paykel HPB3011-6 User Manual

Insert range hood
Hide thumbs Also See for HPB3011-6:
Table of Contents

Advertisement

Available languages

Available languages

WARNING!
Before servicing or cleaning your range hood, switch the power off at the
control panel and disconnect the power to prevent power from being switched
on accidentally.
Allow the appliance to cool after the power has been turned off before servicing.
IMPORTANT!
Wear gloves to protect against sharp edges.
Clean your range hood regularly to avoid the build-up of grease. Grease deposits
are corrosive and may damage the range hood. Use warm water with a mild liquid
detergent and a clean soft cloth to wipe down all surfaces of the range hood.
Do NOT use the following to clean your range hood, they will damage and/or
discolor the surfaces:
Corrosive chemicals.
Abrasive cleaning products.
Citrus-based cleaning products.
Hard brushes and steel wool.
Note: In areas of high humidity or coastal environments, cleaning should be carried
out more frequently.
Changing the remote battery:
Using a Philips screwdriver, remove the screw from the back (A).
1
To open the compartment, insert flat tool in the notch and twist (B).
2
Replace the old battery with the new one (CR2032), symbol
3
Gently slide the battery compartment until the clips engage (D).
4
Return the screw and tighten.
5
14

CLEANING AND MAINTENANCE

A
C
+
to be facing up (C).
B
D

Advertisement

Table of Contents
loading

Table of Contents