Connecting To Components - Spacerails Level 5 Instruction Booklet

Angle curves: Angle the curves inward to help keep the
Marble on the track.
Rail joining for custom designs: To adjust your designs
with the rails, use the Rail Couplings to increase the length
of your rail sections.

CONNECTING TO COMPONENTS

Elevator entry: When installing the elevator entry rails,
make sure that the rails are angled perpendicular to the
elevator entry point.
Elevator exit: When installing the elevator exit rails, pull the
rails close to the Elevator Helix to ensure the Marble enters
the rollercoaster smoothly.
Page 14
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Curve stability: To maintain stability on track curves, place
a dip before the curve starts. This will keep the Marbles
from falling off the tracks.
When installing the elevator entry rails, make sure that
the rails don't dip before entering the elevator.
Connect Rail Splitters and Pendulum Tray to rails using the
Rail Clips.