Spacerails Level 1 Instruction Booklet page 9

B
CONNECT RAILS A, G AND I
Use the following illustrations and pictures as references for attaching the rails to the structure:
A
STEP 1
(A Rail)
STEP 1
(A Rail)
A
Step 1: Connect both A Rail sections between the Loop and the back bottom corner of shaft A.
Step 2: Connect both G Rail sections between the entrance of the loop and the front section of the Rail Splitter.
Step 3: Connect both I Rail sections between the bottom entrance of the elevator and the bottom front corner of shaft A.
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
B
C
STEP 2
(G Rail)
STEP 3
STEP 2
(G Rail)
D
(I Rail)
STEP 3
(I Rail)
E
Page 9