Spacerails Level 1 Instruction Booklet page 11

D
CONNECT RAILS D, E, F AND C
Use the following illustrations and pictures as references for attaching the rails to the structure:
A
Step 7: Connect both D rail sections to the corner of shaft B and the back section of the Rail Splitter.
Step 8: Connect both E rail sections between the back corner of shaft D and the back bottom corner of shaft E.
Step 9: Connect both F rail sections between the front corner of shaft C and the front bottom corner of shaft E.
Step 10: Connect both C rail sections between the front corner of shaft D and the middle entrance of the elevator.
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
STEP 7
D
B
(D Rail)
C
STEP 9
(F Rail)
STEP 7
(D Rail)
B
D
C
STEP 9
(F Rail)
STEP 8
(E Rail)
STEP 10
(C Rail)
STEP 8
(E Rail)
STEP 10
(C Rail)
E
E
Page 11