Subscribe to Our Youtube Channel
Related Manuals for Glow Bricks Lego 123 Sesame Street 21324
Summary of Contents for Glow Bricks Lego 123 Sesame Street 21324
- Page 2 First detach the black lights from the front door, replace the parts on the lighting...
- Page 3 Remove the following parts from the front door Install the lighting parts, clip the wires in between the tan parts...
- Page 4 Then restore the front door parts and the doors afterward Turn around the house, detach the parts as shown...
- Page 5 Install two 1x8 lighting plates on the outer side of the roof Restore the following parts, clip the wire in between the studs then restore the last 2x8 plate...
- Page 6 Now take these lighting parts Install two 1x4 lighting plates...
- Page 7 Install the lighting round plate Remove the clock and parts from the rack, hide the wire behind then restore them...
- Page 8 Restore the 2 floor and beware of the wire at the corner Then install the green lighting plates as ceiling lights...
- Page 9 Now remove the top of the small building and the green plate as shown Install the 1x4 brown, clip the wires of connector and round plate in between the studs on green plate...
- Page 10 Remove the top plate and restore the 2 floor Install the lighting 1x2 plates...
- Page 11 For safety, combine the 1x6 bricks before restoring the top Then restore the top...
- Page 12 The lighting round plate will be installed to the lamp Connect the connectors Remove the clear head from the lamp post and replace by the lighting part...
- Page 13 The lighting round plates will be installed on the tree Connect the USB cable then that’s it...
Need help?
Do you have a question about the Lego 123 Sesame Street 21324 and is the answer not in the manual?
Questions and answers