Citizen pmn User Manual page 99

CR
[Function]
[Code]
[Outline]
ESC " " n
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
Printing
<0D>H
This command prints the data. If the DIP switch segments 1 to 6 are set to OFF, the
printer will print the data in the print buffer and feed the paper by one line. If they are set
to ON, the printer will print the data in the print buffer and will not feed the paper.
Setting the character right space
<1B>H <20>H n
0 n 32
This command sets the right space of the character.
In the double width mode, the right space will be double the set amount. Set the space in
increments of half dot.
n = 0
85
iDP3410 User's Manual
CITIZEN