Table of Contents
Advertisement
ESC "*" m n1 n2 [d] n1 + 256
[Function]
[Code]
[Range]
[Outline]
[Caution]
n2
Specifying the bit image mode
<1B>H <2A>H m n1 n2 [d] n1 + 256 2
m = 0, 1
0 n1 255
0 n2 3
0 d 255
This command specifies the bit image for the mode m as to the number of dots specified
with n1 and n2. Divide the number of dots printed by 256 and assume its quotient to be n2
and remainder to be n1. Therefore, the number of horizontal dots will be n1 + 256 n2.
If the bit image data is entered beyond the dot positions printable in one line, the surplus
data will be discarded. The following table shows the bit image modes for m.
Vertical
m
Dots
0
8
1
8
If the value of m is beyond the conditions, the data subsequent to n1 will be processed as
normal data. Normal data processing will be restored after completing bit image print.
Horizontal Direction
Adjacent Dot
Dot Density
Single density
Double density
Disallowed
89
iDP3410 User's Manual
Total Dots
Setting
Allowed
189
378
CITIZEN
Advertisement
Table of Contents
