Citizen pmn User Manual page 50

Details
FF n
[Function]
[Code]
[Range]
[Outline]
SO
[Function]
[Code]
[Outline]
n-line paper feed
<0C>H n
1 n 127
This command feeds the paper by n-lines. You can set n = 1 to 127 lines. If the print
buffer contains the data, use of this command feeds the paper by n-lines after printing the
data. Setting n = 0 does not feed the paper.
Specifying the double width character
<0E>H
The data following this command is printed doubled in the horizontal direction. Double
width characters remain valid until the double width character cancel command is entered,
but they are also cancelled after they are printed one line. Note that the double width
characters take up two ordinary characters worth of width.
36
iDP3410 User's Manual
CITIZEN