Citizen pmn User Manual page 109

ESC "p" m n1 n2
[Function]
[Code]
[Range]
[Outline]
[Caution]
Specifying the pulse generation
<1B>H <70>H m n1 n2
0 m 1
0 n1 n2 255
This command outputs the signals specified with n1 and n2 to the connector pins.
m
0 Drawer kick connector No. 2 pin
1 Drawer kick connector No. 5 pin
The ON time is n1 2 mS and the OFF time is n2 2 mS.
The user should consider driving the drawer at the following duty ratio.
ON time (ON time + OFF time) 0.2
(It is recommended to make n2 four times higher or more than n1.)
The drawer kick-out solenoid should have a resistance value of 36 or more. Do not use a
lower one because an overcurrent will flow. For the drawer power, be sure to use the
printer power (Drawer kick-out connector No. 4 pin).
Connector Pin
95
iDP3410 User's Manual
CITIZEN