Conductivity Meter Configuration - UGCS SkyHub User Manual

Conductivity Meter Configuration

Conductivity Meter Configuration
Parameter
[CONDUCTIVITY_METER]
MAX_OUTPUT_VALUE_MS_M
MIN_OUTPUT_VALUE_MS_M
Geonics EM38-MK2 Configuration
Parameter
[GEONICS_EM_38_MK2]
BAUD_RATE
BLUETOOTH_NAME
CHANNEL_NUMBER
CONNECTION_TYPE
SERIAL_DEVICE
START_DELAY_S
Copyright © 2019—2021, SPH Engineering
Table 15.23 — Common conductivity meter settings
Default
Description
Value
500 Max altitude value, mS/m
0 Min altitude value, mS/m
Default
Description
Value
19200 UART baud rate, bps
Bluetooth name of the device. May be a
em38mk2[^*]+
regular expression.
Channel number to display on the
Conductivity widget in UgCS-CPM.
Available values: 1-4.
3
Connection type:
RS232
UART serial device. The USB-UART
/dev/ttymxc1
adapter is used.
60 Start delay, s
118
UgCS SkyHub User Manual
Table 15.24 — Geonics EM38-MK2 settings
• 1: conductivity (for 0.5 m in mS/m)
• 2: inphase (for 0.5 m in ppt)
• 3: conductivity (for 1.0 m in mS/m)
• 4: inphase (for 1.0 m in ppt)
• BLUETOOTH: to connect through
bluetooth
• RS232: to connect through UART
Revision 5 • November 2021