Gpr Configuration - UGCS SkyHub User Manual

GPR Configuration

GPR Configuration
Low Frequency GPR Configuration
Parameter
[RADARTEAM_COBRA]
BLUETOOTH_NAME
MODEL
TELEMETRY_PERIOD_MS
TIME_RANGE_NS
High Frequency GPR Configuration
Parameter
[RADSYS_ZOND]
FILTER_1
FILTER_2
IP_ADDRESS
Copyright © 2019—2021, SPH Engineering
Default
Description
Value
Bluetooth name of GPR device. May be
RT[0-9]+
a regular expression.
GPR model. Added to the SEG-Y log
SE-150
header.
2000 Telemetry data refresh rate, ms
Trace time range, ns:
800
Default
Description
Value
High pass filter for the first channel:
OFF
This parameter is also applicable in
single-channel mode.
High pass filter for the second channel.
OFF
See FILTER_1 values.
192.168.0.10 IP-address of the GPR
108
UgCS SkyHub User Manual
Table 15.13 — Low Frequency GPR settings
• 800 for newer devices
• 1600 for older devices
Table 15.14 — High Frequency GPR settings
• OFF: High pass filter is off
• WEAK: Weak high pass filter
• STRONG: Strong high pass filter
• SUPER_STRONG: Super strong
high pass filter
Revision 5 • November 2021