BreatheSafe INPRESS TS User Manual page 8

Controlled document: M-0002B I N P R E S S T S
Revision: B
Issue Date: 30 August 2021
C on te nt s
1 USER GUIDE
1 Key Features
2 WARNING
3 CONTROLLER APPEARANCE
4 FUNCTIONS
5 OPERATING INSTRUCTIONS
5 Enter Setup Mode
6 Change Date and Time
6 Change Pressure Setpoint
6 Change ALarm Setpoint
7 Enable / Disable Buzzer
7 Change Alarm DELAY Settings
7 Change Service Reminders
8 Calibrate Zero Sensor
8 Reset Data Log
8 Test Inputs Option
9 TECHNICAL DETAILS
9 Map of Functions
11 General Arrangement
12 Connector Pinout Details
14 Installation
15 Fan Speed Control Output
15 Mounting
15 Supply Power
15 Calibration
15 Control Override
16 Data Logging Information
20 BREATHESAFE WARRANTY
21 CONTACT US
© BREATHESAFE 2021
CALIBRATE ZERO SENSOR
Start Up Screen > Main Screen > Settings Button > Settings Screen >
Factory Settings button > Zero Sensor
Over long runtime the INPRESS TS may need to be recalibrated. This
screen allows the sensor to be recalibrated if more than 5Pa out.
To recalibrate, open windows and doors, turn off air conditioning, and
any other device that may alter cabin pressure. Press the AUTO ZERO
SENSOR button and leave cabin while measuring. This will reset the
Zero Pressure.
RESET DATA LOG
Start Up Screen > Main Screen > Settings Button > Settings Screen >
Factory Settings button > Factory Settings Screen > Log Settings Button
> Clear Log File
Enter Site Menu and select the FACTORY SETTINGS button. Then,
press the LOG SETTINGS button. Press the CLEAR LOG FILE button to
reset. The BreatheSafe INPRESS TS unit will start to data log from the
Controlled document:
first memory location once again.
Issue Date:
Reset Data Log
PAGE 8 www.breathe-safe.com.au
TEST INPUTS OPTION
Start Up Screen > Main Screen > Settings Button > Settings Screen >
Factory Settings button > Factory Settings Screen > Test Input Button >
Test Input Screen
To check inputs and see if function, access the Test Input screen
through Factory Settings. These show to operator whether doors and
windows are closed or open according to sensors, and if the Eeprom
Store is functional.
Reset Data Log
Delivering Innovative Climate Solutions Worldwide
Test Inputs Screen